DC conceptCONTROL
If the error message "Connection to CNC1 could not be established..." appears when starting the DC conceptCONTROL. The problem can usually be solv...
Thu, 8 Sep, 2022 at 9:25 AM
The error message M-FCT 3 is an error message generated by the spindle control. It is usually triggered by the temperature monitoring. If this error occ...
Wed, 24 Aug, 2022 at 3:40 PM
After switching on the machine, the machine must be referenced. A message window appears after starting the software. If the message window has been clo...
Thu, 8 Sep, 2022 at 9:17 AM
There are two ways to load milling jobs into the control software. The automatic way is to have the CAM software write them to the CNC1 directory, or t...
Thu, 8 Sep, 2022 at 9:19 AM
If the error message "No compressed air" appears, the required minimum pressure is not applied to the machine. Further procedures are de...
Thu, 8 Sep, 2022 at 9:05 AM
To set the language of the controls, go to "Extras -> Settings -> Other". There is a drop-down menu in which you can select the language...
Thu, 8 Sep, 2022 at 9:11 AM
The NC jobs can be sorted or moved by pressing the symbols on the right. With the single arrow, you can move a selected job one position up or down, so ...
Thu, 8 Sep, 2022 at 9:23 AM
If you want to change the lighting from red to white, proceed as follows. Click on the "Advanced" button to open the "Advanced" menu...
Thu, 20 Oct, 2022 at 3:58 PM