WorkNC Instructions
First select the type of stock, the material and the milling unit. In the following view you can now access your explorer using the "Add" butt...
Wed, 28 Jul, 2021 at 11:46 AM
If your WorkNC license does not connect to the server and the program cannot be opened, you can reload the license by double-clicking on the license key (on...
Wed, 28 Jul, 2021 at 11:47 AM
When you select the appropriate milling strategy, the tool diameter and tool IDs are already displayed on the bottom-left of your software (sequence sta...
Wed, 28 Jul, 2021 at 11:49 AM
To add, edit or delete a stock, please go to the menu Settings → Stocks. Then go ahead and click on "add" and select the appropriate stock ty...
Wed, 28 Jul, 2021 at 11:52 AM
When using a new zirconium blank, you must specify the expansion or shrinkage value of the blank before you go ahead with preparing your calculation. You o...
Wed, 28 Jul, 2021 at 12:07 PM
If you have calculated a project and later decided on a different blank, you can remove unmilled projects from a stock. To do so, please go to the Settings...
Wed, 28 Jul, 2021 at 12:12 PM
A complete guide on how to add preface sub-references can be found in the attachment below.
Wed, 28 Jul, 2021 at 11:41 AM